Customer Builds Using The PMACA 10/22 Chassis

Posted by PMACA MFG Sales on Feb 15th 2014

    We have set up a blog for pictures of customer builds using the PMACA 10/22 chassis here. If you would like to share your build, send the pictures and a description to sales@pmacamfg.com

    The descriptions of each build follow the image.


    PMACA 10/22 Long Nose Chassis Builds


    chschs.jpg

    Build:

    • 10/22 Charger. Non-takedown
    • PMACA Long Nose Chassis (red)
    • SBPDW Brace
    • Magpul K grip
    • Magpul XTM handstop kit
    • Tactical Innovations/Pike Arms red trigger housing
    • Tactical Innovations/Pike Arms red charging handle
    • Tactical Innovations auto bolt release

    pmaca-5.jpg

    Build:

    • PMACA 10/22 Long Nose Chassis
    • Ruger 10/22 receiver with Kidd Aftermarket Receiver Rear Tang Attachment
    • KIDD 16.5” Ultra Lightweight Fluted Rifle Bull Barrel
    • KIDD Muzzle Brake
    • KIDD Bolt Handle Charging Assembly With Guide Rod & Spring
    • Volquartsen Exact Edge Extractor
    • Battle Arms Development Sabertube with Buttstock
    • Daniel Defense pistol grip
    • Weaver Grand Slam 4.5-14x40mm with Ballistic-X reticle
    • DNZ Game Reaper Scope Mount
    • Fortis SHIFT™ Short Angled Grip
    • Atlas Bipod

    dan-img-2466.jpg

    danimg-2468.jpg

    Build:

    • Ruger 10/22
    • PMACA Long-Nose Chassis
    • KIDD Ultralight 16.25" Bull Barrel
    • Kineti-Tech 6.5" OBT Shroud
    • ACE SOCOM Stock
    • Hogue Pistol Grip
    • UTG Scout Rail
    • BX-15 Magazine
    • Generic 2-7 Scout Scope w/ Generic Rings (soon to be replaced with a Leatherwood Hi-Lux)


    PMACA 10/22 Multi Chassis Builds


    img-20180806-072504312.jpg

    Build:

    • FDE Cerakote PMACA Multi Chassis
    • FDE 6-position buffer tube and retaining nut
    • FDE Magpul CTR stock
    • FDE AFG-2 foregrip
    • FDE Hogue finger groove grip
    • Caldwell AR bipod in Desert Tan
    • Kidd single stage (1.5#) trigger assembly
    • Standard black Ruger receiver with the factory .920 hammer forged barrel that
    • I threaded for my AAC Element II suppressor or Tactical Solutions muzzle brake.
    • Hawke 4-12X50 scope with TPS rings.

    img-0027.jpg

    img-0034.jpg

    Build:

    • PMACA Multi Chassis
    • PMACA Custom 12" carbon fiber Keymod free float tube (made for barrel scope mount)
    • TG2000 Volquartsen trigger group
    • Ruger 10/22 SS receiver/bolt
    • Volquartsen 21" Carbon Fiber Tension Barrel
    • Volquartsen muzzle brake
    • Volquartsen barrel mount scope rail
    • Hi Lux 5-20 scope, BC lens covers
    • UTG quick release scope rings
    • American Built Arms Company Urban Sniper Stock
    • Hera Arms Side Folding Unit
    • GG&G bipod
    • Accu Shot mono pod
    • SPR target pistol grip
    • Magpul AFG1
    • HR3C 45rnd magazine


    image1.jpg

    Build:

    • PMACA 10/22 Multi Chassis with customer powder coat
    • Hera Folding unit

    image3.jpg

    Build:

    • PMACA 10/22 Multi Chassis
    • Volquartzen tension barrel w/comp
    • Std buffer double tubed for strength
    • Hogue grips and stock
    • Red trigger
    • Red extended mag release
    • Red scope mount
    • UTG QR scope mounts
    • 4-16x AO SCOPE
    • Machined handrail

    image2.jpg

    Build:

    • PMACA 10/22 Multi Chassis
    • Kidd 16" ultra light barrel
    • Magpul CTR stock
    • SWFA 16x scope
    • ADM 30moa scope ring
    • Atlas bipod
    • Ergo tactical deluxe grip
    • Trigger job 2.5 lbs

pmaca-ruger-charger-22-pistol-800x438-.jpg

Build:

  • PMACA frame and Ruger Charger pistol receiver with Jesse James Cold War Gray Cerakote finish
  • ACP Arms 1022 Takedown Conversion kit with 7.25” SS barrel and carbon fiber float tube.
  • Ruger Bipod
  • Tasco Pro Point Red Dot Scope
  • Muzzle Break

fullsizerender.jpg

Build:

  • PMACA 10/22 multi Chassis
  • PMACA Carbon Fiber free float tube

pmaca-agp-od-end-cap.jpg

Build:

OD Green Cerakote build on the PMACA 10/22 multi chassis with matching PMACA free float end cap:

AGP TD kit with:

Broken down

pmaca-agp-od-taken-down.jpg

And in a case

pmaca-agp-black-case.jpg


PMACA 10/22 AGP Take Down Chassis build from ca18detsilvia Reportedly 4.5 lbs without optics.

ca18detsilvia-1.jpg

ca18detsilvia-2.jpg

Build:

  • PMACA 10/22 Multi Chassis
  • PMACA AGP end cap
  • Taccom CF buttstock
  • AGP takedown Kit with 10" CF free float tube and sights Black Cerakote barrel
  • Houge grip

PMACA 10/22 Standard Chassis Builds


short-job-4-5-18-cropped.jpg

Build:

  • PMACA 10/22 chassis
  • Kidd receiver
  • Kidd 6" threaded bbl
  • Kidd buffer
  • Kidd charging handle
  • Volquartsen trigger group
  • JWH custom bolt
  • LWRC Ultra Compact tube and stock
  • Magpul grip
  • Magpul VFG
  • RMR 01 on an American Defense mount.

joseph-thompson-4-5-18.jpg

Build:

Rifle:

  • PMACA 10/22 chassis with extended rail
  • Kidd ultra light barrel with comp
  • Kidd trigger job
  • Skeletonized extended charging handle
  • Vortex Crossfire II in Gamereaper mount
  • Hogue grip
  • Magpul CTR
  • Bipod that came with charger

Stainless Charger takedown:

  • PMACA 10/22 Takedown
  • BX trigger
  • Kidd CH and guide rod
  • Vortex Spitfire
  • Hogue grip
  • Shockwave brace and tube with UTG folder

pmaca-10-22-od-green.jpg

Build:

  • PMACA Standard Chassis (Cerakote OD Greed)
  • PMACA 5.75" Picatinny Rail
  • Hogue overmolded buttstocks
  • Milspec 6 position milspec buffer tubes
  • Simmons 8-Point Truplex Reticle Riflescope, 3-9x40mm (Matte)
  • UTG medium height rings
  • ApexHorizon Hunting Tactical Rifle Bipod Foldable and Adjustable Height Sling
  • Swivel Stud Mount
  • Standard A2 grips
  • Nordic Gap Filler
  • UTG Tactical Low Profile Rail Mount for Ruger 10/22 Rifle
  • To add Clarke Bull Barrel. Ruger BX 15, 15 round magazines

20160115-094033.jpg

Build:

  • PMACA 10/22 Chassis
  • Tandemkross left side charging rail
  • Ruger Charger
  • KAK Shockwave Brace

Quick change between different configurations

20150417-094749.jpg

20151115-121250.jpg

Build:

  • PMACA 10/22 chassis
  • Ruger 10/22 CHARGER receiver
  • JWH custom bolt
  • Polyurethane buffer
  • JWH Extended Charging Handle
  • KIDD 6" threaded barrel
  • Generic picatinny rail red laser
  • Tactical Innovations Fake Suppressor
  • Generic AR15 Pistol Tube
  • Generic Bi-Pod
  • KAK Blade AR Pistol Stabilizer

20151114-124718.jpg

Build:

  • PMACA 10/22 Standard Chassis
  • Ruger 10/22
  • Volquartsen trigger group
  • Tactical Solutions SBX 10.5 Inch barrel
  • SWR Spectre suppressor
  • Mil-spec M4 grip
  • Magpul Moe fore-grip and stock
  • Aimpoint T-1 Micro red dot sight

A new build from 1911luvr

1911luvr-build.jpg

Build:

  • Tactical Solutions barrel
  • UTG receiver extension/buffer tube
  • Ultralight MFT adjustable stock
  • Strike Industries Grip
  • PMACA Standard Chassis( That got put through the machine twice, kind of matches the end of the barrel)

From Mr. Simpson:

pmaca-ruger-1022.jpg

Build:

  • Magpul stock assembly,
  • PWS Summit threaded carbon fiber barrel

Here is a colorful build using a blue 10/22 chassis: Gplank on Rimfire central.

glen-plank-10-6-15-p1.jpg

glen-plank-10-6-15-p2.jpg

Build:

  • PMACA 10/22 Chassis - Blue Anodize
  • Tactical Solutions .920 bull barrel in purple
  • Ruger receiver
  • Billet machined purple trigger group
  • Butt stock and pistol grip from Cavalry Manufacturing

PMACA 10/22 Takedown Chassis Builds


20180130-165339.jpg

Build:

  • PMACA 10/22 Takedown
  • Stainless Charger takedown
  • Shockwave tube and blade
  • Magpul AFG 2
  • Vortex spitfire

blue-takedown-marcus-.jpg

Build:

  • Ruger 10/22 takedown rifle
  • PMACA 10/22 Takedown chassis
  • Lots of other cool stuff

PMACA 10/22 Lightweight Chassis Builds


ahn2.jpg

Build:

  • Ruger 10/22 50th anniversary edition
  • PMACA Lightweight Chassis
  • KSA 18" bull barrel w/ flutes
  • Volquartsen trigger group
  • Kidd charging handle
  • Daniel defense buttstock
  • Troy battle pistol grip
  • Magpul stub front grip
  • PMACA Extended rail
  • Bobro engineering QD mount
  • Athlon Argos BTR 1-4x24mm MOA, FFP illuminated scope

10/22 Chassis build in Black from Labratt104 on Rimfire Central

1-img-0556.jpg

1-img-0582.jpg

Build:

  • PMACA 10/22 Chassis in Armor Black Cerakote
  • PMACA Xrail (5.75")
  • Kidd Classic receiver
  • Kidd bolt
  • Kidd bolt buffer
  • Kidd charging handle
  • Kidd rod and spring
  • Kidd single stage trigger and trigger pins
  • 16.5 inch Fedderson fluted .920 barrel
  • UTG carbine length buffer tube
  • MagPul MOE Carbine stock
  • MagPul MOE-K grip
  • Bipod
  • Extended Height rings
  • Scope